Black Box ACX048 Manual Download Page 86

Page: 86 / 228

Page 86

724-746-5500 | blackbox.com

Chapter 4: Configuration

Access to the configuration menu requires administrator rights. Login is
mandatory.

Table 4-5. Menu login parameters.

Field

Input

User

admin

Password

admin

Press the <F10> key in the main menu of the OSD to open the login mask. To log
out a user, press the <F10> key again.

NOTE: For security reasons, change the administrator password as soon as

possible.

NOTE: If needed, create a secondary administrator user and password in case the

administrator of the system is not available and you need access. If you lose

the password for the admin account, there is no way to retrieve it. We

recommend that you set up a second admin account and keep the

credentials in a safe place.

4.2.2 Control via Java Tool

Figure 4-4. Java icon.

Requirements

If you want to use the Java tool, you need these items:

• Computer with an executable Java tool and an installed Java Runtime

Environment (JRE, version 1.6 or higher). You can download the latest version
from the Java website.

• Java Tool software. This tool is available at the Black Box website or FTP site.

• Available network connection between the Java tool and the ServSwitch DKM

FX or FXC

NOTE: Contact your system administrator concerning JRE and network

connection.

Installation of the Java Tool

The Java tool is available as a single executable program file that does not require
a separate installation.

Summary of Contents for ACX048





































































































































































































































Search results

Summary of Contents for ACX048

Reviews:

Black Box ACX048, Manual, Page: 86 / 228

Search results

Summary of Contents for ACX048

Reviews: