manualshive.com logo in svg

Black Box ACX048, Manual, Page: 80 / 228

Share
Download
Black Box ACX048 Manual Download Page 80

Page 80

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

4. Configuration

4.1 Command Mode

The ServSwitch DKM FX has a Command Mode that enables several functions via 
keyboard command during normal use.

To enter Command Mode, use a hotkey sequence, and to exit Command Mode, 
press <Esc>. While in Command Mode, the Shift and Scroll LEDs on the console 
keyboard will flash.

NOTE:  In Command Mode, normal keyboard and mouse operation will cease.  

Only selected keyboard commands are available.

NOTE:  If there is no keyboard command executed within 10 seconds after  

activating Command Mode, it willl be automatically deactivated.

The following table lists the keyboard commands to enter/exit Command Mode 
and to change the hotkey sequence:

Table 4-1. Command mode components.

Function

Keyboard command

Enter Command Mode (default)

2x <Left-Shift> (or hotkey)

Exit Command Mode

<Esc>

Change hotkey sequence

<hotkey>, <c>, <new hotkey code>, <Enter>

Earlier versions of firmware (before 9/30/2011): 
<Left Ctrl> + Left Shift> + <c>, <hotkey Code>, <Enter>

NOTE:  <Key> + <Key> = Press keys simultaneously; <Key>, <Key> = Press keys 

successively, 2x <Key> = Press key quickly, twice in a row (similar to a 
mouse double-click).

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments