Black Box ACX048 Manual Download Page 58

Page: 58 / 228

Page 58

724-746-5500 | blackbox.com

Chapter 2: Overview

2.6.4 Extender OSD

All extenders used with the matrix switch have an individual OSD to display the
connection status of the console.

Figure 2-44. Example view of extender OSD.

Table 2-47. Extender OSD information

Field

Description

CON

Name of the extender’s individual console

CPU

Name of the currently connected CPU

Access

Full Access: The extender’s indivdual console has a KVM connection to the displayed CPU.

Video Access: The extender’s individual console has a video-only connection to the displayed CPU.

Private Mode: The extender’s individual console has a Private Mode connection to the displayed
CPU.

Not connected: The individual console is not connected to a CPU.

SHARED

x device(s) shows the exact number of devices connected to the current CPU. If the field remains
empty, no other shared connections are active.

Summary of Contents for ACX048





































































































































































































































Search results

Summary of Contents for ACX048

Reviews:

Black Box ACX048, Manual, Page: 58 / 228

Search results

Summary of Contents for ACX048

Reviews: