manualshive.com logo in svg

Black Box ACX048, Manual, Page: 56 / 228

Share
Download
Black Box ACX048 Manual Download Page 56

Page 56

724-746-5500   |   blackbox.com

 

Chapter 2: Overview

•  If there is a red cross on a port when switching by the matrix view, the console 

chosen to be connected does not have access rights to the respective CPU at 
this port.

NOTE:  To show the extender information of the currently selected port in the right 

part of the working area, press the left mouse button.

The information in Table 2-38 is available:

Table 2-43. Extender information.

Symbol

Description

Extender name

Name of the selected extenders

Extender type

Type of the selected extender

Port ID

Number of the selected port

Device name

Name of the connected console or CPU

Connections

Listing of assigned connections to the marked port (full access or video access)

NOTE:  To open the context menu for the currently selected port with further 

functions, press the right mouse button.

The context functions in Table 2-39 are available:

Table 2-44. Context functions.

Function

Description

Open extender

The menu for definition of the currently selected extender is opened

Open device

The menu for definition of the currently selected console or CPU is opened

Switch

The menu for execution of switching applications is opened

To reload the Matrix View:

• Press the “F5” key of a connected keyboard.

• Execute “Edit > Reload” in the menu bar.

• Press the “Reload ” button in the tool bar.

• Wait several seconds if ”automatic reload” checkbox is checked.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments