manualshive.com logo in svg

Black Box ACX048, Manual, Page: 224 / 228

Share
Download
Black Box ACX048 Manual Download Page 224

Page 224

724-746-5500   |   blackbox.com

 

Appendix: Glossary

USB HID —

 USB HID devices (human interface devices) allow for data input. You 

don’t need a special driver during installation; “New USB-HID device found” is 
reported. Typical HID devices include keyboards, mice, graphics tablets, and  
touchscreens. Storage, video, and audio devices are not HID.

VGA —

 Video Graphics Array (VGA) is a computer graphics standard with a  

typical resolution of 640 x 480 pixels and up to 262,144 colors. Its is preceded by 
the graphics standards MDA, CGA and EGA.

A.1 Matrix-Specific Glossary

Auto Disconnect —

 Matrix function that allows an automatic disconnect 

between a console and a CPU, if the OSD is opened via this console.

Auto Logout —

 Matrix function that describes the duration of inactivity after the 

user has been logged out from the OSD at this console.

CON Device —

 Logical term that summarizes several physical extenders to switch 

more complex console systems via matrix.

CON Timeout —

 Matrix function that allows an automatic disconnect of the 

console from the connected CPU after a predefined time.

Console ACL —

 Console ACL (Access Control List) is a list that shows the respec-

tive switching rights for the various consoles.

CPU Auto Connect —

 Matrix function that allows an automatic connection  

establishment between the own console and a random available CPU.

CPU Device —

 Logical term that summarizes several physical extenders to switch 

more complex CPU systems via matrix.

CPU Timeout —

 Matrix function that allows the user to disconnect after a  

predefined period of time of inactivity from the respective CPU.

EXT Unit —

 Part or extender board of a CON or CPU unit with a connection to 

the matrix. A CON or CPU unit can consist of several EXT devices.

Force Connect —

 Matrix function that allows a user to switch with his own  

console to a CPU that is already used. This enables the user to take keyboard and 
mouse control. The connected console loses K/M control but keeps video.

Force Disconnect —

 Matrix function that allows to switch with the console to a 

CPU that is already used. This enables the user to take KVM control. The  
connected console loses complete KVM control.

Java Tool —

 Java based control and configuration tool for the ServSwitch DKM 

FX matrix.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments