manualshive.com logo in svg

Black Box ACX048, Manual, Page: 22 / 228

Share
Download
Black Box ACX048 Manual Download Page 22

Page 22

724-746-5500   |   blackbox.com

 

Chapter 2: Overview

2.1.2 Access Options

You have the following options to access the ServSwitch DKM FX for  
configuration and operation:

Table 2-1. Access options.

Access option

Symbol

OSD

Java tool

Serial interface

2.2 System Overview

A ServSwitch DKM FX system consists of a ServSwitch DKM FX or DKM FX 
Compact and, for KVM applications, one or more CPU units/CON units. The 
ServSwitch connects to the CPU units/CON units by interconnect cables (copper 
or fiber) or is connected directly to the video devices when used as a video matrix.

The CPU units connect directly to the sources (computer, CPU), using the included

 

cables.

Monitor(s), keyboard, and mouse connect to the CON units.

The ServSwitch DKM FX and the CPU units/CON units communicate over CATx, 
fiber, or coaxial interconnect cables. The ServSwitch DKM FX Compact and the 
CPU units/CON units communicate over CATx or fiber cable.

Figure 2-1 shows the system overview. Table 2-2 describes its components.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments