manualshive.com logo in svg

Black Box ACX048, Manual, Page: 198 / 228

Share
Download
Black Box ACX048 Manual Download Page 198

Page 198

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

Alternatively, there are the following keyboard commands available in order to 
switch to the local source:

Table 5-6. Switching operations.

Keyboard Command Function

 <hotkey>, <k>, <1>, 
<Enter>

Switching to extender connection

<hotkey>, <k>, <2>, 
<Enter>

Switching to extender connection 2 
(only with redundant CON Units)

<hotkey>, <l>, 
<Enter>

Switching to the local source  
(computer, CPU)

5.5 Multi-Screen Control

Using the Multi-Screen function, you can switch the USB-HID signal between  
different statically connected sources (computer, CPU) within a CON Device in two 
different ways: via mouse or via keyboard.

Switching via Mouse

You can switch the USB-HID signal by moving the mouse pointer beyond the 
edge of the current display to a neighboring display according to the  
configuration.

To switch via mouse, proceed as follows:

1.  Move the mouse pointer to the edge of the display which that vertically or  

horizontally borders the neighboring display.

2.  Move the mouse pointer beyond the edge of the display. The mouse pointer 

will appear on the respective position at the target display.

The switching option has been performed and the USB-HID signal will now be 
available at the target display.

Switching via Keyboard

To switch via keyboard:

1. Start Command Mode with the hotkey.

2.  Select the target display by pressing the respective key on the numeric pad of 

the keyboard.

The switching option has been performed and the USB-HID signal will now be 
available at the target display.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments