manualshive.com logo in svg

Black Box ACX048, Manual, Page: 196 / 228

Share
Download
Black Box ACX048 Manual Download Page 196

Page 196

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

3.  Release the left-mouse button. A popup to select the available switching type 

(Full Access, Video Access, or Private Mode) will be opened.

4.  Select the desired switching type. The switching operation will be immediately 

executed. At the same time, all extender units that are assigned to the involved 
devices will be switched.

NOTE:  If there is a red cross on a port when switching by using the Matrix View, 

the console to be connected does not have access rights to the respective 
CPU at this port.

To disconnect an existing link between CON and CPU devices, follow these steps:

1. Click on the port that is to be disconnected by using the right mouse button.

2.  Select the “Disconnect” function in the popup that appears. The connected 

ports will be disconnected immediately. At the same time, all further  
connections of the extenders assigned to the involved devices will be  
disconnected.

5.4 CON Switch

KVM extender CON Units connected to a local source (computer, CPU) can be 
locally switched via the matrix. Switching is performed between the local source 
and the KVM connection and can be executed via hotkeys or via OSD.

If you switch to the local source, the KVM connection will be automatically  
disconnected.

NOTE:  When using CON units with the option to connect a local source  

(computer, CPU) in a multi-screen control environment, the local switching 
will be disabled.

You have the following option to switch to the local source:

Figure 5-9.

OSD

• Select Switch in the main menu.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments