manualshive.com logo in svg

Black Box ACX048, Manual, Page: 194 / 228

Share
Download
Black Box ACX048 Manual Download Page 194

Page 194

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

NOTE:  Switching operations can only be performed in on-line mode, so you need 

an active network connection between the matrix and the Java Tool.

To set a KVM connection between a console and a CPU, double-click on the  
corresponding selection box in the “Full Access” column and select the requested 
CPU.

To set a video connection between a console and a CPU, double-click on the  
corresponding selection box in the “Video Only” column and select the requested 
CPU.

To set a Private Mode connection between a console and a CPU, double-click on 
the corresponding selection box within the “Private Mode” column and select the 
requested CPU.

NOTE:  CPUs with respective consoles that do not have access rights will not 

appear in the list.

The following symbols are shown in the connection overview:

Table 5-4. Connection overview fields.

Field

Description

The CON device is connected via Shared Access with at least one further 
console to the same CPU. The CON device has full access at the moment.

The CON device is connected via Shared Access with at least one further 
console to the same CPU. The CON device has a video access connection  
at the moment.

You can use the following button to perform a switching operation:

Table 5-5. Swiching operation buttons.

Button

Function

Send

Send switching operations to the matrix.

Reset

Disconnect all existing connections within the matrix.

Reload

Reload switching status.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments