manualshive.com logo in svg

Black Box ACX048, Manual, Page: 192 / 228

Share
Download
Black Box ACX048 Manual Download Page 192

Page 192

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

1.  Select the CON device from the “CON Devices” list that you want to switch to 

a CPU device and open it by pressing “Enter”.

2.  Select the CPU device from the “CPU Devices” list that you want to connect to 

the open CON device.

3.  Confirm with the respective keyboard command according to the desired  

connection type.

Switching operations from the CON device can only be done to CPU devices that 
are available in the “CPU Devices” list.

The following information is shown in this menu:

Table 5-2. Extended switch menu fields.

Field

Description

CON device

The assigned physical extender unit.

CON assigned

Virtual CON device that is assigned to the real CON device.

CPU connected

Currently connected CPU device.

CON status

Current connection status (CON device).

EXT list

List of all available physical extender units (CON units).

CPU device

Assigned physical extender unit (CPU unit).

CPU assigned

Real CPU device that is assigned to a virtual CPU device.

CON connected

Currently connected CON device.

CPU status

Current connection status (CPU device).

EXT list

List of all available physical extender units (CPU units).

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments