manualshive.com logo in svg

Black Box ACX048, Manual, Page: 190 / 228

Share
Download
Black Box ACX048 Manual Download Page 190

Page 190

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

 

Figure 5-3. Example view Selection list CPU Devices.

Activating the automatic Scan Mode for CPU Devices

You can use a scan mode based on the favorite list of each console or user. The 
scan mode allows the matrix to switch in sequence between the CPU Devices in 
the favorite list within a predefined time. All scans are performed in video only 
mode.

To configure the scan mode, go to Chapter 5.8.1.

Activate the scan mode via OSD:

Figure 5-4.

1. Define a favorite list for the CON device or user.

2. Start Command Mode with the hotkey and press <o> to open OSD.

3.  Select one of the CPU devices defined in your favorite list from the CPU  

selection list.

4.  Press the CPU Scanner button to confirm your selection. The scan will start 

automatically.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments