manualshive.com logo in svg

Black Box ACX048, Manual, Page: 185 / 228

Share
Download
Black Box ACX048 Manual Download Page 185

Page 185

724-746-5500   |   blackbox.com

 

Chapter 5: Operation

2.  Enter the index number of the new CPU from the list of favorites and confirm 

with <left Shift>, <Enter>. The Command Mode closes and the console  
connects to the new CPU with complete control in Private Mode

.

Example: Switching to favorite CPU 3 in Private Mode

<left Shift>, <left Shift>, <3>, <left Shift>, <Enter>

Direct Switching of Video

1.  Start Command Mode with the hotkey. For control, the LEDs Shift and Scroll 

flashes at the keyboard, if command mode is activated.

2.  Enter the index number of the new CPU from the list of favorites and confirm 

with <Space>.

At the same time, the Command Mode is closed and the console is connected to 
the new CPU with video only.

Example: Switching to favorite CPU 1 with video only:

<left Shift>, <left Shift>, <1>, <Space>

NOTE:  You can only use the hotkeys to switch to unused and allowed CPUs. 

Hotkeys are only supported if neither “Enable User Login” nor “Enable User 
ACL” is selected and the user is logged in the OSD.

Switch to previous CPU

1.  Start Command Mode using hotkeys. For control, the Shift and Scroll LEDs on 

the keyboard flash when Command Mode is activated.

2.  Press the <p> key on your keyboard. At the same time, the Command Mode 

closes, and the console connects to the previous CPU with complete control.

NOTES: 

If you switch to a previous CPU that was connected with Video Access before, 
you will be connected to this CPU with full KVM access.

You can only switch to unused and allowed CPUs with hotkeys. The “Force 
Connect” and “Force Disconnect” options, as well as the restrictions of the User 
ACL and CON ACL, are taken into account. Hotkeys are only supported if neither 
Enable User Login nor the Enable User ACL is selected and the user is logged in 
the OSD.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments