Black Box ACX048 Manual Download Page 182

Page: 182 / 228

Page 182

724-746-5500 | blackbox.com

Chapter 4: Configuration

FIgure 4-98. OSD View Service Mode.

3. Start the update by pressing the “Update” button in the lower part of the

working area.

4. Quit Service Mode after updating upon request in the popup window or via

“Matrix > Deactivate Service Mode” in the task area.

5. In the Java tool via “Administration > Update EXT Firmware” in the “Expert

Mode Protocol” tab, verify that updates for all extenders have been installed
correctly.

4.15 License Management

In this menu, the matrix can be upgraded with new function bundles by using
license keys.
You will need to purchase the licenses to obtain the additional features. Currently
the licenses are:

ACX-JAV — Extended switching capabilities with DKM FX Java utility.

ACX-API — API switching feature enabled, also includes ACX-JAV.

ACX-SYS — Enable syslog.

ACX-CAS — Required for every chassis for cascading.

Summary of Contents for ACX048





































































































































































































































Search results

Summary of Contents for ACX048

Reviews:

Black Box ACX048, Manual, Page: 182 / 228

Search results

Summary of Contents for ACX048

Reviews: