manualshive.com logo in svg

Black Box ACX048, Manual, Page: 176 / 228

Share
Download
Black Box ACX048 Manual Download Page 176

Page 176

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Figure 4-91. Menu System—Matrix Grid.

4.14 Firmware Update
4.14.1 Matrix Update

The firmware of the matrix can be updated in this menu.

To access the menu, use the Java icon:

Figure 4-92. Java icon.

NOTES:  

To update the matrix, only use computers that are self-sustaining and not  
integrated in the KVM extender/matrix setup.

Ensure that the computer used for the update is not set in standby mode or sleep 
mode during the update.

Save your configuration externally before you start the update.

We do not recommend updating the matrix via a WLAN because this can cause 
files to be half uploaded and a firmware upgrade to fail.  If you have the option to 
use a cross-over CATx cable to perform the update, use this method. 

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments