Black Box ACX048 Manual Download Page 167

Page: 167 / 228

Page 167

724-746-5500 | blackbox.com

Chapter 4: Configuration

4.11.1 Export Options

Configuration lists are exported in this menu. To export, proceed as follows:

1. Select “File > Export” in the menu bar.

2. After opening the menu, select the list to export (Extender, CPU, Console or

User).

3. Select the storage location for the export file.

4. Confirm the export with the “Finish” button.

Figure 4-83. Menu File–Export screen.

4.11.2 Import Options

Configuration lists are imported in this menu. To import, proceed as follows:

1. Select “File > Import” in the menu bar.

2. After opening the menu, select the list to import (Extender, CPU, Console or

User).

3. Select the directory of the list to import.

4. Confirm the import with the “Finish” button.

Summary of Contents for ACX048





































































































































































































































Search results

Summary of Contents for ACX048

Reviews:

Black Box ACX048, Manual, Page: 167 / 228

Search results

Summary of Contents for ACX048

Reviews: