Page 160
724-746-5500 | blackbox.com
Chapter 4: Configuration
5. When using the function Owner, you can determine which control display is
permitted for USB-HID switching to the different displays. Select that display
from the list. To make a display accessible for all neighboring control displays,
set the Owner function to shared.
6. Use the function Frame to configure a red frame that shows the current display
with mouse control after a selectable timer expires. The frame to fade in can be
individually activated by using a timer >0 seconds.
4.10 Saving and Loading Configurations
4.10.1 Active Configuration
Use the OSD button to access the menu:
Figure 4-72. OSD button.
Select “Configuration > Save” in the main menu.
By selecting this menu item, the active configuration of the matrix is saved to the
permanent matrix memory. By default, the last configuration that has been saved
in this way will be restored after the matrix restarts.
NOTE: Changing or saving configurations blocks the matrix memory and freezes
all OSD menus for a few seconds. The switching connections are not
affected by this freeze.
If you select “Auto Save” within the system settings, it will automatically save the
configuration periodically.
4.10.2 Saving of Configurations (Internal)
In this menu, the current matrix configuration to predefined storage locations is
saved. However, it does not replace configuration buffering.
You can access the menu via OSD or Java:
Figure 4-73. OSD and Java icons.