manualshive.com logo in svg

Black Box ACX048, Manual, Page: 158 / 228

Share
Download
Black Box ACX048 Manual Download Page 158

Page 158

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

To configure the Multi-Screen Control, proceed as follows:

1.  In the Arrangement field, select the respective display arrangement that is  

available at the CON Device you want to configure (1 x 4 or 2 x 2).

     The fields for the configuration of the individual displays will be arranged 

accordingly.

2.  To switch the USB-HID only by using keyboard commands, enable manual 

switching. You can use multi-head consoles.

3.  Ensure that the option “Enabled” is set to “Y” on all used displays to activate 

the display that uses the Multi-Screen Control.

4.  Select one or more control displays within the CON Device by setting the  

function “Control” as “Y” in the respective display field. Control displays are 
referred to the extender units within the Multi-Screen Control that are  
connected to keyboard and mouse.

5.  When using the Owner function, you can determine which control display is 

permitted for USB-HID switching to the different displays. Select that display 
from the list. To set all neighboring control displays to access a display, set the 
function “Owner” to “shared.”

6.  Use the Frame function to configure a red frame that shows the current  

display with mouse control after a selectable timer expires. Activate the frame 
to fade in individually by using a timer >0 seconds.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments