Black Box ACX048 Manual Download Page 156

Page: 156 / 228

Page 156

724-746-5500 | blackbox.com

Chapter 4: Configuration

Java Tool

• Select System > Switch in the task area.

Figure 4-69. Menu System—Switch.

To configure parallel operation, proceed as follows:

1. Activate the Enable Video Sharing function.

2. Activate the Force Connect function.

3. Activate the Keyboard Connect function, if taking over control by a keyboard

event should be possible.

4. Activate the Mouse Connect function, if taking over control by a keyboard

movement should be possible.

5. Define a Release Time of inactivity (0 - 999 sec.) after that control can be taken

over.

4.9.7 Multi Screen Control

A CON device with several monitors can be configured via USB-HID switching to
control several connected sources (computer, CPU). To support this feature, you
will need to have the ACX-GSW license activated.

Summary of Contents for ACX048





































































































































































































































Search results

Summary of Contents for ACX048

Reviews:

Black Box ACX048, Manual, Page: 156 / 228

Search results

Summary of Contents for ACX048

Reviews: