manualshive.com logo in svg

Black Box ACX048, Manual, Page: 131 / 228

Share
Download
Black Box ACX048 Manual Download Page 131

Page 131

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

4.6.2 Creating Fixed-Port Extender Units

To create a fixed-port extender unit (for example, USB 2.0), proceed as follows:

1. Press the “New” button.

2.  Select whether a template for a USB 2.0 CON unit (USB CON Unit) or USB 2.0 

CPU unit (USB CPU Unit) should be used.

3. Press the “OK” button.

4.  Determine a port at the matrix that should be used with the USB 2.0 extender 

unit (Fixed Port). As an option, the name of the USB 2.0 extender unit can be 
changed (Name). You need to choose a port that has not already been 
assigned.

5. Press the “Apply” button to save the new extender unit.

NOTE:  Created extender units are always set as fixed-port extenders. These  

configurations are necessary, if you want to switch, for example, USB 2.0 
connections via the matrix

.

NOTE:  After creating the Fixed Port for USB 2.0 extenders, the I/O board will need 

to be restarted, otherwise it will not function properly.

4.6.3 Deleting Flex-Port Extender Units

Deleting Flex-Port extender units connected to the matrix is not possible.

4.6.4 Deleting Fixed-Port Extender Units

To delete a fixed-port extender unit (for example, USB 2.0), proceed as follows:

1.  Verify that the fixed-port extender unit to be deleted is currently not assigned 

to a device.

2. Select the fixed-port extender unit to be deleted in the selection list on the left 
side of the menu EXT Units and confirm with the key <Okay>.

3. Press the “Delete” button.

4. Press the “OK” button to confirm the deletion.

NOTE:  To make a fixed port available again for Flex-Port extender units after  

deleting a fixed-port extender unit, restart the I/O board.

4.7 USB 2.0 Extender

This section helps you to configure and use your USB 2.0 extenders. These 
extenders will have to be connected to standard I/O boards in this case. USB 2.0 
extenders can be configured for independent switching or can be assigned to 
already existing KVM extenders.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments