manualshive.com logo in svg

Black Box ACX048, Manual, Page: 122 / 228

Share
Download
Black Box ACX048 Manual Download Page 122

Page 122

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

To create a new user, proceed as follows:

1. Press the “New” button.

2. Select a template of an existing user if applicable (choose template).

3. Press the “OK” button.

4. Set a user name.

5. Set a password.

6. Set general access permissions.

7. Set user permissions for CPU access (paste function).

8. Set user favorites for OSD access.

9. Press the “Apply” button to save the new user settings.

You can select between the following keyboard commands:

Table 4-26. Keyboard commands.

Function

Keyboard Command

Add CPU to Full Access list

<F>

Add CPU to Video Access list

<V>

Add CPU to No Access list

<N>

NOTE:  To select all CPUs/targets, highlight one CPU/target, and press Ctrl-A on 

the keyboard.

4.5.2 Favorites List Users

Individual favorites lists of CPUs that have to be switched frequently can be  
created for different users in this menu. A Favorites list can contain up to sixteen  
different CPUs.

The switching of the favorites is done via hotkeys using the keyboard.

You can access the menu in two ways: via OSD or Java.

Figure 4-37. OSD and Java tool icons.

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments