manualshive.com logo in svg

Black Box ACX048, Manual, Page: 113 / 228

Share
Download
Black Box ACX048 Manual Download Page 113

Page 113

724-746-5500   |   blackbox.com

 

Chapter 4: Configuration

Table 4-19. Network settings.

Field

Selection

Description

DHCP

Activated

The network settings are automatically supplied by a DHCP server 
(default)

Deactivated

Function not active

IP address

Byte

Input of the IP address in the form “192.168.1.1,” if DHCP is not active

Subnet mask

Byte

Input of the subnet mask in the form “255.255.255.0,” if DHCP is not 
active (default 255.255.255.0)

Gateway

Byte

Input of the subnet mask in the form “192.168.1.1,” if DHCP is not 
active

API service

Activated

LAN interface at the DKM FX or FXC is activated for access via Java tool 
(API service port 5555)

Deactivated

Function not active

FTP server

Activated

FTP server for tranmission of configuration files activated.

Deactivated

Function not active

Syslog

Activated

Syslog server for status request is active

Deactivated

Function not active

Syslog server

Byte

Input of the IP address of the Syslog server in the form “192.168.1.1”

Trace

DEB

Activate debug messages in Trace (default: Yes); 

NOTE: The debug messages are exclusively for matrix diagnostics. They 
only should be activated after consultation with Black Box. Otherwise, 
increased traffic of data might limit the performance of the CPU board.

INF

Activate information messages in Trace (default: Yes)

NOT

Activate notification messages in Trace (default: Yes)

WAR

Activate warning messages in Trace (default: Yes)

ERR

Activate error messages in Trace (default: Yes)

Syslog

DEB

Activate debug messages in Syslog (default: Yes); 

NOTE: The debug messages are exclusively for matrix diagnostics. They 
only should be activated after consultation with Black Box. Otherwise, 
increased traffic of data might limit the performance of the CPU board.

INF

Activate information messages in Syslog (default: Yes)

NOT

Activate notification messages in Syslog (default: Yes)

WAR

Activate warning messages in Syslog (default: Yes)

ERR

Activate error messages in Syslog (default: Yes)

Summary of Contents for ACX048





































































































































































































































Reviews:

No comments