Black Box AC3000A, User Manual, Page: 28 / 42

26 26
HD VIEW
see which ports have devices connected. In Figure 19 a device is
connected to port 4.
Figure 19 Manually displayed topology
3. To define the units connected to the ports, click the checkbox of
a port or a number of ports that have the same device connected.
4. Click . A drop-down menu appears.
5. Select the device type.
Note!
When the device is a Line Splitter, repeat the process of defining the connected devices
for each port of the Line Splitter.
7.3.6 Naming a port
To give a port an identifying name:
1. Check the port number (ensure that no other ports are checked).
In the manual section,
Set device name: appears.
2. Type a new name for the port - You can give ports identical names.
This name appears immediately on the left.
7.3.7 Saving a topology
To save a topology choose File/Save or Save as. Save the topology.