Black Box AC1060A-R2, Manual, Page: 8 / 28

CAT5 MULTI VGA SYSTEM
WARNING
This equipment is not intended for, nor does it support, distribution
through an Ethernet network. Do not connect these devices to any sort
of networking or telecommunications equipment!
2.2 Package Contents
You should have received the following when ordering a CAT5 Multi VGA System
receiver:
• The transmitter or receiver.
• External power supply (100–250 VAC, 50–60 Hz, autosensing) with cord.
• This manual.
2.3 Equipment You May Also Need
• Rackmount Brackets (see Appendix D)
• Serial cable
• Audio cable
• Video cable
• CAT5 cable
2.4 Compatible Cabling
The CAT5 Multi VGA System products are compatible with Cat5/5e/6 data cabling as
well as skew free CAT5/5e cabling manufactured for video applications. Note that some
skew free Cat5 is specific to a particular vendor and is not compatible with these
products. Please ensure any skew free CAT5 cable is non-proprietary prior to purchase/
installation.
CAT6 cable, due to the manufacture method, can exhibit much greater skew than
standard CAT5/5e and may require skew compensation beyond what the standard
product offers.
CAT5/5e/6 cabling for the CAT5 Multi VGA Series must be pinned to the TIA-EIA
T568B wiring specification (see Appendix A) We also highly recommend that all CAT5
cables be pre-terminated and tested. Cables terminated on-site or in an existing
infrastructure should be tested before use to ensure compliance with the TIA-EIA
T568B specification. Using incorrectly terminated CAT5 cables can damage the units.
6