English
8
TWO‑YEAR LIMITED WARRANTY
Black & Decker (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than BLACK+DECKER and its Authorized
Service Centers. A defective product meeting the warranty
conditions set forth herein will be replaced or repaired at no
charge in either of two ways:
The first, which will result in exchanges only, is to return
the product to the retailer from whom it was purchased
(provided that the store is a participating retailer). Returns
should be made within the time period of the retailer’s policy
for exchanges. Proof of purchase may be required. Please
check with the retailer for its specific return policy regarding
time limits for returns or exchanges. The second option is
to take or send the product (prepaid) to a BLACK+DECKER
owned or authorized Service Center for repair or replacement
at BLACK+DECKER’s option. Proof of purchase may be
required. BLACK+DECKER owned and authorized service
centers are listed online at ww.blackanddecker.com. This
warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which
vary from state to state or province to province. Should you
have any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended
for commercial use, and accordingly, such commercial use
of this product will void this warranty. All other guarantees,
express or implied, are hereby disclaimed.
lATin AMERiCA:
This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country specific warranty information contained in
the packaging, call the local company or see the website for
such information.
Imported by
.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
(1‑800‑544‑6986)
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP:
In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
•
FOR YOUR sAFETY:
Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at
www.BlackandDecker.com
/
NewOwner
Repairs
WARNING:
To assure product SAFETY
and RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a BLACK+DECKER
factory service center or a BLACK+DECKER authorized
service center. Always use identical replacement parts.
Accessories
WARNING:
Since accessories, other than
those offered by BLACK+DECKER, have not been tested
with this product, use of such accessories with this
product could be hazardous. To reduce the risk of injury,
only BLACK+DECKER recommended accessories should
be used with this product.
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact BLACK+DECKER call
1‑800‑544‑6986
.
• Only use BLACK+DECKER replacement filter: HLVCF10
Replacing the Filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your BLACK+DECKER dealer.
Visit
www.blackanddecker.com
to locate dealers.
• Remove the old filters as described in
Emptying the Dust
Bowl and Cleaning the Filters.
• Fit the new filters as described in
Emptying the Dust
Bowl and Cleaning the Filters.
9. Install the dust bowl
4
onto the main housing
3
,
ensuring the main housing tabs
14
aligns with the dust
bowl slots
15
as shown in Fig. F and rotate the dust
bowl clockwise to lock it firmly into position.
Cleaning the Filter
1. Once the filter and pre-filter are removed from the
dust bowl shake off or lightly brush any dust from the
pre-filter
8
and filter
9
.
2. Rinse out the dust bowl with warm soapy water.
3. Wash the filters regularly using warm, soapy water and
ensure that it is completely dry before using again. The
cleaner the filter is, the better the product will perform.
4. It is very important that the filters are completely dry and
correctly in position before use.
5. Ensure the filters are completely dry for 12 hours
before refitting.
6. Follow instructions in the
Removing pre‑filter
section for
assembly instructions.
