ENGLISH
(Original instructions)
9
CLEANING MODES
AUTO CLEANING MODE
♦
The robot starts to vacuum automatically and combines
the different cleaning modes in one optimizing the
cleaning of your home to the maximum. To use the auto
cleaning mode, press the button on the remote
control.
♦
When the cleaning cycle ends or if the battery runs out, it
returns to the charging base automatically.
EDGE CLEANING MODES
♦ Once the robot finishes cleaning the open areas of your
floor, use the perimeter mode to make sure it has been
cleaned along the walls and around the legs of the
furniture.
♦
If you prefer a faster cleaning of the edges, press the
button
on the remote control.
SMALL ROOM CLEANING MODE
♦ When it is necessary to clean a specific room, press the
room cleaning mode button on the remote control
.
♦ When the cleaning is finished, the robot will stop.
♦
Make sure to close the doors of the room while using
this mode.
Go home MODE
♦
Mode of return to the charging base automatically when
the robot detects that only 30% of the battery is left.
♦
To activate the Go Home mode, press the
button on
the remote control.
WATER TANK CLEANING MODE
♦ When the floor is clean you can attach the water tank
(AE) into the vacuum cleaner. The water tank works by
dripping so the mop will moisten and mop the floor.
♦
Open the sealed lid of the tank (AG) and introduce water
into the tank.
♦
Ensure that the mop is fastened securely.
♦
Attach the water tank to the vacuum cleaner and you
can start the cleaning process selecting the cleaning
mode you need.
IMPORTANT:
Do not use the mop outdoors.
Remove the carpets to avoid damaging them.
