Page 9
UV
SET UP & USE
Anion Function
Anion function starts after the power is turned on, and the icon is lit. It will
constantly run. Anion function creates negative ions which attaches to dust,
allergens, odors and removes them from the air.
Clean Filter
When the icon slowly flashes, the filters need to be cleaned. All filters can be
cleaned except the HEPA Filter. Press the air volume adjustment button for 4
seconds to reset and return to normal operation.
Sleep Mode
Sleep mode will activate in AUTO Mode depending on light sensitivity in the
room. Sleep mode will not work when in manual mode.
Check Filter/Filter Cover
Icon will light up and blink red when the filter is not installed correctly or the
cover to the unit is not secured. Once issue is corrected the icon will shut off.
Ultraviolet Light
Eliminates viruses, bacteria, mold and mildew.
TVOC/PM2.5 Air Quality Indicator
Indicator light which will change color according to the air quality detected by
the sensor.
CONTROL PANEL DISPLAY
HEPA Filter Replacement
After 2,160 hours of use, REPLACE FILTER indicator light will flash when the
HEPA/Activated Carbon filter needs to be replaced. Once replaced, press the air
volume control button
for 5 seconds to reset.
WARNING:
Do not run the unit without the filters in place.
TVOC/Air Quality Indicator Lights
Number
Color of light
Air quality
1-50
Blue
Excellent
51-100
Green
Good
101-150
Yellow
Normal
151-500
Red
Poor
