bk ultrasound Flex Focus 1202, User Manual

Page: 31 / 66

Flex Focus 1202 User Guide (BB1756-Q) Safety Information 31
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference received, including interference that
may cause undesired operation.
Computer Security
When the Flex Focus is connected to a hospital network, BK Ultrasound does not
take any responsibility for computer viruses from the network that may infect the
Flex Focus.
Service and Repair
Transducers
Caution: RC-c1
The remote control can be disrupted by other equipment operating at the same
frequency of 2.5 GHz.
Check
external
media
Caution CS-c1
You must perform a virus check on any external storage medium (USB device or DVD) to
make sure that it is virus-free before you connect it to the system.
Authorized
personnel
WARNING SR-w1
Service and repair of BK Medical electromedical equipment must be carried out only by
the manufacturer or its authorized representatives. BK Medical reserves the right to
disclaim all responsibility, including but not limited to responsibility for the operating
safety, reliability and performance of equipment serviced or repaired by other parties.
After service or repairs have been carried out, a qualified electrician or hospital technician
should verify the safety of all equipment.
Electrical
shock
WARNING T-w1
The transducer sockets contain terminals with 3.3V. Do not touch the patient while you
are touching an uncovered socket.
Type B
transducers
WARNING T-w2
When using Type B (non-isolated) transducers, carefully check all electrical equipment
within the patient area. Also, consider using additional protective grounding.