BK TECHNOLOGIES BKR5000 User Manual Download Page 48

Page: 48 / 71

BK Technologies

- 44 -

Other Options and Functions

Many operational features and functions can be programmed for user

selection and control. Items can be programmed to the radio buttons

or switches. In addition to these quick set buttons, a menu of multiple

functions can be accessed with a “MENU” button.

Backlight [LITE]

Conventional and Trunked Channels

Backlight on/off control can be assigned to a switch, button or as a

menu item. In addition, backlighting may be programmed with the PC

Radio Editor to illuminate when any key is pressed.

Battery Life [LIFE]

Conventional and Trunked Channels

Battery Life information includes:

% battery capacity available until depletion

The full capacity of the battery

Estimated time left before depletion

Busy Channel Operation

Conventional Channels

The radio can be programmed for different behavior when a

conventional channel is busy.
How the radio reacts to a busy channel is programmed with the

following operation options only accessible in the PC Radio Editor:

Off

- No busy channel transmit limiting will occur.

Indicate

- This setting will display "Busy" momentarily and an alert

tone will sound if conflicting traffic is present, but the radio is still

allowed to transmit.

Lockout

- This setting prevents the radio from transmitting, "Busy"

will be displayed and an alert will sound until the PTT is released.

Override

- This setting prevents the radio from transmitting. "Busy"

will be displayed and an alert tone will sound until the PTT is

released. However a rapid release and press of the PTT will allow the

Summary of Contents for BKR5000








































































Search results

Summary of Contents for BKR5000

Reviews:

Related manuals for BKR5000

Brands by name

Popular brands

BK TECHNOLOGIES BKR5000, User Manual

Search results

Summary of Contents for BKR5000

Reviews:

Related manuals for BKR5000

Brands by name

Popular brands