BK Radio P150, Service Manual

Page: 20 / 264

BK Radio Page 2-5
installation and programming
2.2.1.3 proGramminG uSer SelectaBle network acceSS codeS
The KNG can be pre-programmed with up to 32, user selectable NACs. NACS are selected with the
programmed buttons. If enabled, the NACs can be programmed via the radio’s keypad.
to enter nac list programming:
E n t e r P a s s w o r d
0 0 0 0 0 0
eSc clr ent
C a l l L i s t
U s e r To n e s
U s e r N A C s
ESC ▲ ▼ ENT
U s e r N A C s
1 - $ 2 9 3
2 - $ D 7 E
ESC ▲ ▼ ENT
N A C 0 1
$ 0 0 0
eSc clr ent
N A C 0 1
$
eSc Bck clr ent
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu lck
rxd Scn
Ta l k a r o u n d
T x P o w e r
K e y p a d P r o g
ESC ▲ ▼ ENT
1. Press the Menu button.
2. Use the up/down buttons to highlight ‘Keypad Prog’.
3. Press ‘ENT’.
4. Use the up/down buttons to highlight ‘User NACs’.
5. Press ‘ENT’.
6. Use the keypad to enter the six digit password.
7. Press ‘ENT’.
8. Use the up/down buttons to highlight the NAC you wish to edit.
9. Press the’ ENT’ Button.
10. Press the ‘CLR’ button to clear the currently programmed NAC.
11. NACs are programmed as three digit hexadecimal numbers. (000 - FFF)
Use the keypad to select the desired digits.
Use the 2 key to select A, B or C and the 3 key to select D, E or F.
Press the ‘BCK’ button to move to the previous character.
13. Press the ‘ENT’ button to set the NAC.