BK Radio P150, Service Manual

Page: 120 / 264

BK Radio Page 6-1
Section vi
illuStrated partS liSt
6.1 introduction
This section helps you identify parts used in BK Radio’s DPH-CMD radios. It includes Replacement
Parts Lists for all major assemblies arranged from the Final Assembly down to an individual part level.
Each List is followed by the corresponding Assembly Drawing (if required), Schematic Diagram and
Parts Placement. Parts itemized in the various lists meet BK Radio’s design specifications and are the
recommended replacement parts.
6.2 partS liSt deScription
Replacement Parts Lists contain specific information on each part in the corresponding Assembly
Drawing and Schematic Diagram. Sub-assemblies are also listed by a part number, helping you find the
correct sub-assembly parts. Each part and Sub-assembly has a 12-digit number that is unique. Parts
are usually identified by their schematic reference number or, in the case of an assembly, their item
number.
6.3 aSSemBly drawinG SymBolS
Several symbols are used in the Assembly Drawings. One symbol helps to identify parts (or items) that
are listed in the Drawing’s corresponding Parts List. Another symbol references a specific Note that is
on the Drawing.
The symbols are (with examples):
32 — Refers to Item 32 in the Replacement Parts Lists
itm 32 — also refers to Item 32 in the Replacement Parts Lists
6
— Refers to Drawing’s Note No. 6
l1 — Refers to Part L1 (also its Schematic Reference No.)
j14 — Refers to Part J14 (also its Schematic Reference No.)
2 req’d — Indicates two of the Items are required in the Assembly