manualshive.com logo in svg

BK Radio KAA 0700, Manual, Page: 9 / 12

Share
Download
BK Radio KAA 0700 Manual Download Page 9

- 6 -

KNG as Target Radio     

(firmware version 4.6.2 and higher)

To clone to a KNG radio, it must be put in “Destination Clone Mode.” The 

KNG radio can only receive “Active Zone” or “Picklist” clone information.

 Cloning Mode

Successfully

Cloned

ESC        ▲        ▼         ENT

           Cloning             

    Clone Active Zone

    Clone Picklists

► Enter Dest Clone

ESC        ▲        ▼         ENT

ESC    PREV     NEXT    ENT

    

On the KNG Target radio:

    1. Select the Menu button.
    2. Use the up/down buttons to select “cloning”.
    3. Press the [ENT] button.

                                          4. Select “Enter Dest Clone”.

 Cloning Mode

Successfully

Cloned

ESC        ▲        ▼         ENT

    Destination Clone

             Mode

          Waiting...

ESC        ▲        ▼         ENT

                                      EXIT

    When the KNG Target radio is in “Destination
    Clone Mode”, the Source radio can initiate the
    cloning of the “Active Zone” or “Picklist”.

   

   

   

When cloning has started, the KNG Target

 

   

radio will display “Destination Clone Start”

    

    After a successful information transfer,
    “Power off” is displayed and the radio will
    restart.

    The only cloning functions supported by the 
    KNG Target radio are “Active Zone” and 
    “Picklist”. All other functions are unsupported.

    Destination Clone

            Start

ESC        ▲        ▼         ENT

ESC        ▲        ▼         ENT

       Powering off

ESC        ▲        ▼         ENT

 Cloning Mode

Successfully

Cloned

ESC        ▲        ▼         ENT

       Zone to Zone

       Unsupported

ESC        ▲        ▼         ENT

Summary of Contents for KAA 0700













Reviews:

No comments