manualshive.com logo in svg

BK Radio KAA 0700, Manual, Page: 11 / 12

Share
Download
BK Radio KAA 0700 Manual Download Page 11

- 8 -

KNG-S to KNG Cloning

Connect the KAA0701 Cloning Cable to the side connector of the Source 

and Target radios and power up both radios.
On the KNG-S Source radio select the zone with the information to be 

cloned by pressing the Zone button, or selecting “Zone Select” from the 

menu, then entering the number of the desired zone.
On the Target radio select the Zone or Group to which the information is 

to be sent. 
For Legacy radio models select a target group by pressing the [#] key 

and entering the number of the desired group.

 

 Cloning Mode

Successfully

Cloned

ESC        ▲        ▼         ENT

Talkaround

Tx Power

Cloning

ESC        ▲        ▼         ENT

Clone               

Active Zon

e

Zone -to -Zone

ESC        ▲        ▼         ENT

Ch 1

KNG - P25

171.5850 0 MHz

    

RXD

               SCN

ZONE    T/A     MENU     LPW

    

On the KNG-S Source radio: 

Press the Menu button.

1. 

Use the up/down buttons to select 

2. 

“Cloning”.

Press the [ENT] button.

3. 

Select “Active Zone” cloning.

4. 

Press the Enter button to send the 

5. 

cloning information.

 

 

  

 

Cloning Mode

Active Zone

Successfully

Cloned

ESC        ▲        ▼         ENT

Clone Failed:

Target Zone

Locked

ESC        ▲        ▼         ENT

After a successful information transfer, 

“Cloning Successful” is displayed on the 

Source radio before reverting to Send 

Clone mode. 

Cloning Mode

Active Zone

Successfully

Cloned

ESC        ▲        ▼         ENT

Clone Failed:

Target Zone

Locked

ESC        ▲        ▼         ENT

If the cloning process fails or the target 

radio’s zone is blocked form accepting an 

incoming clone, a failure message will 

appear on the Source radio.

Summary of Contents for KAA 0700













Reviews:

No comments