52
12.31 Read status register
Byte Description
0
RV
Reverse voltage
1
OV
Over voltage
2
OC
Over current
3
OP
Over power
4
OT
Over temperature
5
SV
remote sense wires are disconnected
6
CC
Constant current
7
CV
Constant voltage
8
CW
Constant power
9
CR
Constant resistance
10
PASS
Pass autotest
11
FAULT
fail to pass autotest
12
COMPLET Complete autotest
12.32 Read the information of E-Load (rated max current, max voltage, min voltage, max power, max resistance, min resistance). (01H)
Byte Description
1
AAh
2
Address 0-31, 0XFF)
3
Command 01H
4-7 Rated max current (Low byte to High byte order)
8-11 Rated max voltage (Low byte to High byte order)
12-15 Rated min voltage (Low byte to High byte order)
16-19 Rated max power (Low byte to High byte order)
20-23 Rated max resistance (Low byte to High byte order)
24-25 Rated min resistance (Low byte to High byte order)
26
Checksum
12.33 Set/Read hardware OPP value (02H/03H)
Byte Description
1
AAh
2
Address (0-31, 0XFF)
3
Command 02H/03H
4-7 OPP value (Low byte to High byte order)
8-25 Reserved
26
Checksum
