Common Command Introduction
17
Query Format
<channel>:BursTWaVe? <parameter>
<channel>={C1, C2}
<parameter>=<period>
……
Query Response
<channel>:BTWV <type>,<state>,<period>
……
Example
Set channel one burst period to 1S.
C1:BTWV PRD, 1
Set channel one burst delay to 1s C1:BTWV DLAY, 1 Set channel one burst to infinite C1:BTWV
TIME, INF
Read channel two burst parameters of which STATE is ON.
C2:BTWV?
Return:
C2:BTWV STATE,ON,PRD,0.01S,STPS,0,TRSR,INT,
TRMD,OFF,TIME,1,DLAY,2.4e-07S,GATE_NCYC,NCYC,
CARR,WVTP,SINE,FRQ,1000HZ,AMP,4V,OFST,0V,PHSE,0
Read channel two burst parameters of which STATE is OFF.
C2:BTWV?
Return:
C2:BTWV STATE, OFF
2.17 Parameter Copy Command
Description
Copies parameters from one channel to another.
Command Syntax
ParaCoPy <destination channel>, <src channel>
<destination channel>={C1, C2}
<src channel>={C1, C2}
Note:
the parameters C1 and C2 must be set to the device together.
Example
Copy parameters from channel one to channel two.
PACP C2, C1
Related Commands
ARWV, BTWV, MDWV, SWWV, BSWV
2.18 Arbitrary Wave Command
Description
Sets and gets arbitrary wave type.
Command Syntax
<channel> ARWV(ArbWaVe) INDEX,<value1>, NAME,<value2>
<channel>={C1, C2}
<value1>: the table below shows what the index number mean.)
< value2>: see table below.
Query Format
<channel>:ARbWaVe?
<channel>={C1, C2}
Query Response
<channel>:ARWV <index>
Example
Set StairUp arbitrary wave output by index.
C1:ARWV INDEX, 2
Read system current wave.
ARWV?
Return:
ARWV INDEX,2,NAME,StairUp
Summary of Contents for 4060B Series
Page 1: ......
