BK Precision 2560 Series, User Manual

Page: 168 / 171

167
Serial Trigger
I
2
C Trigger
Condition Start, Stop, Restart, No Ack, EEPROM, Address & Data, Data Length
Source (SDA/SCL) CH1 to CH4
Data format Hex
Limit Range EEPROM: =, >, <
Data Length
EEPROM: 1 byte Address & Data: 1 to 2byte; Data Length: 1 to 12byte
SPI Trigger
Condition Data
Source (CS/CLK/Data) CH1 to CH4
Data format Binary
Data Length 4 to 96 bit
Bit Value 0, 1, X
Bit Order LSB, MSB
UART/RS232 Trigger
Condition Start, Stop, Data, Parity Error
Source (RX/TX) CH1 to CH4
Data format Hex
Limit Range =, >, <
Data Length 1 byte
Data Width 5 bit, 6 bit, 7 bit, 8 bit
Parity Check None, Odd, Even
Stop Bit 1 bit, 1.5 bit, 2 bit
Idle Level High, Low
Baud Rate (Selectable)
600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s
Baud Rate (Custom) 300 bit/s to 334000 bit/s
CAN Trigger
Type
All, Remote, ID, ID + Data, Error
Source
CH1 to CH4
ID
STD (11bit), EXT(29bit)
Data format
Hex
Data Length
1 to 2 byte
Baud Rate (Selectable) 5k/10k/20k/50k/100k/125k/250k/500k/800k/1M bit/s
Baud Rate (Custom) 5 kbit/s to 1 Mbit/s
LIN Trigger
Type Break, Frame ID, ID+Data, Error
Source CH1 to CH4
ID 1 byte
Data format Hex
Data Length 1 to 2 byte
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s
Baud Rate (Custom) 300 bit/s to 20 kbit/s