BK Medical bkSpecto, Advanced User'S Manual

Page: 109 / 164

bkSpecto Advanced User Guide (16-01642-01) 3D Imaging 109
After you have acquired a 3D data set, it is displayed as a volume on the monitor. You
can select various ways of viewing the volume, and you can use various tools and
settings to enhance the image.
Viewing a 3D Data Set
When viewing a 3D data set, there are different buttons for enhancing the 3D view.
These are described in detail later in this chapter.
Enhancing a 3D View
When a 3D view is displayed, you can use different buttons to enhance the
appearance of the 3D volume and make it easier to see the structures you are
interested in:
•
3D Brightness
•
3D Contrast
•
3D Zoom
•
3D Opacity
•
3D Luminance
•
3D Hue
•
3D Photorealistic
Presets
After you have set Brightness , Contrast, and Zoom , and any other 3D settings, you
can save your settings as a Preset . Do as follows:
1
Tap Preset .
2
Select Save Preset.
3
Type in a name for your preset.
4
Keep or change the Label, Calc and Bodymark packages.
5
Decide if the preset should be the default for this transducer.
6
Tap Save.
3D Layout Options
When you view the acquired volume, you can change the layout of the monitor using
the following buttons:
•
Orientation – Turns the orientation marker on and off. The orientation marker
is positioned on the first frame in the volume.
•
Wireframe – Shows or hides the wire frame on the volume.
•
Measure Dist. (only in Cube view) – Shows or hides the measurement lines or
boundaries on the volume, the Measurement menu (on the right side of the
monitor), and Measurement results (on the left side of the monitor).