BizLink RM-826-Q25-WD, User Manual, Page: 4 / 48

Quick Start Guide
To begin using your Bizlink router CONNECT to POWER, then
For Ethernet/Fiber/Satellite connections:
1. Connect the Provider cable (RJ-45) to the WAN port (blue) on the back of the
unit
The unit is now ready.
2. Connect any device by wire to 1-4 LAN ports (yellow)
3.
For WIFI access the default is: “Bizlink”, password bizlink2020
a. See WIFI setup below to change to your personal settings
For LTE wireless connections:
1. Insert the Provider SIM card on the side of the unit (note: foil side UP; wedge
side IN). Push in and make sure it click and holds in place
2. Open and Internet Browser and Type: 192.168.1.1 in the address bar
3. Type User name: root; Password admin (these are the default settings)
4. Click MODEM>Configuration (on left side of screen)
5. On APN field insert > (your Provider’s APN)
6. SAVE then Save & Apply (bottom right of screen)
7. REBOOT
The unit is now ready
Contact REAL Mobile – support@myrealmobile.com
Router Description and Features
The Bizlink is full featured router which supports a hard-wired Ethernet/Fiber connection to the
Internet, as well as a 3G/4G/LTE wireless connection. The router also offers IEEE802.11b/g/n
wireless broadband (WIFI) connection, as well as, hard wire LAN port connections.
Connecting through a Cellular link is instant. Insert your SIM Card connect the Router to power,
an Internet connection can be accessed and shared virtually anytime anywhere within a wireless
broadband network.
BizLink includes a cellular SIM slot that will allow you to insert your SIM card directly in the
router.