Bizerba VS 12 F--P, Operating Instructions Manual

Page: 25 / 79

Operating instructions VS12 /C /F /F-P /W Safety instructions
6.080.98.5.10.13
en 3 - 3
3
WARNING Missing components!
The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.
– Check if the machine is complete before it is re-started.
– Check if components are positioned correctly and firmly.
– Only use original Bizerba spare parts and accessories.
3.5 Protective and safety equipment
– Blade guard ring, stationary, cannot be removed
– Blade cover closed, stationary, can be removed
– Gauge plate, covering carriage stroke area
– Back panel, not removable (not for VS12F-P)
– Product holder on or behind the product
– Forced guidance of product holder in cutting range less than 60 mm
– Protective circuit in case of voltage cutoff
– Sharpener with protective cover of open blade area
Remaining risks that cannot be excluded by technical measures:
–
Risk of tripping/slipping if the work area is not kept tidy.
– Risk of injury if the required personal protective clothing is not
worn.
3.6 Plates on machine
Beware of hazardous electric charge
Fig. 7: Warning sign: Flash sign