Operation
Operating instructions iS10 / iS20
24
38019417000 en
5
Symbol for approved or non-approved operation
For scales subject to legal control only: In approved operation this symbol
must not flash. If the symbol flashes, metrologically relevant data is not protec-
ted.
Multi-range scale: effective range is "1", "2" or "3".
5.2
Switch device on / reset
Plug in power pack The scale is supplied via the network.
Key
Display presentation
Process description
All display segments will be activated.
The program number is briefly displayed.
Middle segments are briefly displayed.
The device automatically switches to weighing
mode. The scale is ready for operation.
Press key to save inputs or to restart the device.
5.3
Switching device off
After a brief warm-up period, the maximum weighing accuracy is
reached. It is recommended to leave the weighing terminal connected
to the mains voltage during the entire day. This will ensure a constant
operating temperature and maximum weighing accuracy.
Key
Process description
Press and hold key for more than 3 s.
The device changes to stand-by mode.
Unplug to separate device from power supply.
