Bizerba GSP H Instruction Manual Download Page 69

Page: 69 / 92

Instruction manual GSP

Maintenance

38107010002 en-US

69 / 92

Tilt carriage inwards

Place the product holder on the carriage.

Tilt the carriage in the direction of the ar-
row.

Using handle, screw into place on the
carriage foot.

Fig. 99: Tilt carriage inwards GSP H

Fig. 100: Tilt carriage inwards GSP HD

The machine is ready for operation.

WARNING

Missing components!

The operator can only be protected from injuries and the machine
protected against damage if all the components of the machine are
assembled properly.

– Check if the machine is complete before it is re-started.

– Check if components are positioned correctly and firmly.

– Only use original Bizerba spare parts and accessories.

8.6

Blade sharpening

Re-sharpening is necessary if the slicing result is unsatisfactory.

Summary of Contents for GSP H





























































































Search results

Summary of Contents for GSP H

Reviews:

Related manuals for GSP H

Brands by name

Popular brands

Bizerba GSP H, Instruction Manual

Search results

Summary of Contents for GSP H

Reviews:

Related manuals for GSP H

Brands by name

Popular brands