Bizerba GLM-I, Instruction Manual, Page: 95 / 505

Instruction manual GLM-I Setting display and keyboard layout
38.019.129.001 en 93
8
Example: Total window 1. Settings and procedures for total windows 2 and 3 are analog.
The following totals can be displayed in the total window 1:
–
<#1: Total 1>
– <#1: Total 2>
– <#1: Total 3>
– <#1: Article total>
– <#1: Prod- group total>
– <#1: Daily total>
– <#1: Tare total>
– <#1: *1 of act. presel.col.> (Total 1 of current total preselection column)
– <#1: *2 of act. presel.col.> (Total 2 of current total preselection column)
– <#1: Total display tool> (total defined in total display tool)
In addition, the following settings are possible for total window 1:
<#1: W/o 1st tot.win-
dow>:
1st total window not displayed.
<#1: Remote labels>: Number of remote labels to be printed is displayed (with total
printouts).
Mode level: 2
The total window is only visible if the display format <Text&totals display> is set, see
page 91.
Set total display for total window 1
<Etc> / <eService displ.only> / <1st total window>
Press softkey with respective setting.
The activated softkey is highlighted with a dark bar.
8.8 Switching on or off weight history
The weight history indicates the last determined weights. Depending on the configuration it
is displayed in the text and total display.
The weight history can be shown or hidden through the function descri-
bed in the following, if it is activated in GT-SoftControl.
The operation of GT-SoftControl is not subject of this documentation.
Read the operating instructions on GT-SoftControl.
The following settings are possible:
–
"W/o"
– "With"
The weight history is activated in program GT-SoftControl.
Mode level: 2