Bizerba GLM-I, Instruction Manual, Page: 249 / 505

Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 247
19
Entering key for macro request
After insertion of code content "Macro" a window appears for entering the key that is as-
signed to the macro to be used.
Touch key and confirm.
In the code structure the key designation appears in brackets behind the code content
"Macro".
Entering text field for formula
After insertion of code content "Fomula in text field" a window appears for entering the text
field that includes the formula.
Contact your Bizerba technical consultant or Bizerba Service if you
have any questions on the formula interpreter.
Enter text field number and confirm.
In the code structure the text field number appears in brackets behind the code content
"Fomula in text field".
Removing code content from code structure
Code editor is open.
Set cursor on field "Code structure" in front of the code content to be deleted.
Press <Clear>.
The code content is removed from the code structure.
19.11.5 Deleting scanning rule
Delete the scanning rules you no longer require.
Mode level: 3 (local) or 4 (global)
<Etc> / <Scanning rules> / <Delete scanning rule>
Enter scanning rule number and confirm, see page 77.
To irrevocably delete the scanning rule, reply to security query with <yes>.
19.12 Calling up scanning rule
Usually scanning rules are assigned to the articles and are called up automatically during
article change. Here you may call up a scanning rule for the current labeling, no matter for
which article.
Mode level: 2
<P interface> / <Ident scanner> / <Scanning rules>