Bizerba GLM-I, Instruction Manual, Page: 188 / 505

Texts Instruction manual GLM-I
186 38.019.129.001 en
15
<Exit>
The text editor is closed. The entered text appears in the softkey and is used in the next
labeling job.
15.6 Managing simple texts
Simple texts consist of a single line and contain up to 15 characters. Use simple texts for
delivery addresses, dispatch types and store names, for example, on customer-specific la-
bels.
Allocation of simple texts to text fields on customer-specific labels as
well as definition of text sizes and other properties is handled via the re-
spective customer-specific label layout.
Enter simple texts directly in article data, see page 131. After opening an article, the sim-
ple texts are displayed on the softkeys <Simple text 1> to <Simple text 10>. Simple texts
can be temporarily changed for the current labeling job via the softkeys.
Example: <Simple text 5>. The procedure for the other simple texts is the same.
Mode level: 1 or 2
Mode level 1: <Etc> / <Texts> / <Etc> / <Simple texts 1-10> / <Simple text 5>
or
Mode level 2: <Texts> / <Simple texts 1-10> / <Simple text 5>
Enter or edit text.
<OK>
The simple text appears in the softkey.
It is immediately used for customer-specific labels to which simple text has been assigned.