Bizerba GLM-I, Instruction Manual, Page: 161 / 505

Instruction manual GLM-I Prices and currencies
38.019.129.001 en 159
14
14.3.8 Select a different font size for the places after the decimal
point
You can print the digits in the price before and after the decimal point in different font
sizes. This is where you select different font sizes for the places after the decimal point.
You will find an overview of the available font sizes in the annex, see
page 491.
Mode level: 2
<Article data> / <Price> / <Print price> / <Print sales price> / <Etc> /
<Font sales pr. after separator>
Select the font size you want from the list. In the "Same as in layout" setting, the font
size in the current label layout for decimal places is used.
14.3.9 Print conversion rate
Determine here whether the conversion rate (exchange rate from primary to secondary
currency) should be printed on the labels.
You can also enter this setting in the PLU data, see page 132.
The following settings are possible:
"W/o":
Don't print conversion rate on labels.
"With": Print conversion rate on labels.
Mode level: 2
The double price labeling is activated, see page 158.
<Article data> / <Price> / <Print price> / <Print.of conv.rate>
Tap the soft key until the required setting is highlighted.