Bizerba GLM-I, Instruction Manual, Page: 145 / 505

Instruction manual GLM-I Weights and ingredients
38.019.129.001 en 143
13
13 Weights and ingredients
13.1 Select weight type
With the weight type, you determine the unit and the number of places after the decimal
point for displaying the weight value. You can enter the weight type as follows for certain
situations:
–
in PLU data, see page 132
– for the current labeling job with the function described below
The following settings are possible:
–
"kg .0001"
– "kg ,001"
– "kg ,01"
– "kg ,1"
– "kg"
– "lb ,0001"
– "lb ,001"
– "lb ,01"
– "lb ,1"
– "lb"
If you select a weight type with a different number of digits, all the
weight values saved in the device are adjusted (fixed weight, tare,
weight totals).
Mode level: 2
Changing a weight type is only permitted in certain scales and for fixed weight.
In the following scales types you can switch between kg and lb:
kg lb
6/15 kg, 2/5 g 15/30 lb, 0.005/0.01 lb
15/30 kg, 5/10 g 30/60 lb, 0.01/0.02lb
Changing the weight type for the current labeling job has to be approved by Bizerba Serv-
ice.
<Article data> / <Weight> / <Weight types>
Select and confirm weight type.
The weight type is changed for the current labeling job. The change is not saved with the
PLU data.