Bizerba GLM-I, Instruction Manual, Page: 138 / 505

Article data Instruction manual GLM-I
136 38.019.129.001 en
12
12.3.3 Release or disable article call-up via keyboard
The following settings are possible:
"Disabled":
Article change via keyboard has been disabled.
"Permitted": Article change via keyboard is permissible.
"Permitted with autom.
stop": The article change via the keyboard is only permissible when
device stops.
Mode level: 5
<Main menu> / <PLU> / <PLU change> / <PLU-Mode change> /
<PLU change via keyboard>
Select setting and confirm.
The current setting appears on the softkey.
12.3.4 Approve or block automatic change with PLU change
With the following functions you define whether various automatic PLU changes can be
completed based on PLU data:
Weight type change:
<Weight type change>
Tare change: <Tare chg. on PLU change>
Country change: <Country change>
Label type change: <Label type change>
Each of the following settings are supported:
–
"With"
– "no"
As well as the change options described here you can configure wheth-
er the weight class and labeling type are changed with the PLU, see
page 278, see page 317.
Mode level: 5
<Main menu> / <PLU> / <PLU change> / <Change options>
Tap the respective change option until the setting you want is displayed.
12.4 Create PLU
Mode level: 3 (local) or 4 (global)
Mode level 3: <PLU> / <PLU data local>
or
Mode level 4: <PLU> / <PLU data global only>
or
Mode level 4: <PLU> / <PLU data glob.+local>