BIXOLON XT2-40 Series, User Manual, Page: 52 / 57

Ver. 1.00 - 52 -
XT2-40 Series
5-5 Replacing Platen Roller
1) Open the media cover and print head levers and remove the media and ribbon.
2) Pull upwards the buckle on right side and remove the platen roller to the right.
3) Assemble new Platen roller assembly in reverse order.
Caution
Make sure to turn the printer power off prior to replacing roller.
Warning
The print head gets extremly hot while printing or after the printing,
this can cause serious burns.
Do not touch the print head.
Platen Roller
Buckle