BIXOLON XT2-40 Series, User Manual, Page: 47 / 57

Ver. 1.00 - 47 -
XT2-40 Series
4-7 Label size calibration and Self Test Page
The printer can automatically detect and store label height.
That means the host computer does not need to transmit the label height to the printer.
And the self-test function lets you check whether the printer is functioning normally.
Here is how you run the label size calibration and self test.
Step.01 Check that the media is loaded correctly.
Step.02 Switch off the printer.
Step.03 Switch the printer on again, keeping the FEED button pressed.
When the ready status screen appear, release the FEED button.
The printer will now measure the media and store the label length
Step.04 Once the printer has successfully measured the media, it will print a self-test
label.