BIXOLON SRP-383, Network Connection Manual

Page: 5 / 25

Ver. 1.00 - 5 -
SRP-383
4. How to Connect
WLAN can be configured through the printer’s WLAN interface. Likewise, WLAN can also
be configured though the printer’s USB interface.
4-1 Connecting Printer
4-1-1 USB cable
Connect USB cable to Printer, PC device.
Use the “Net Configuration Tool” to adjust the settings.
4-1-2 WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to
the LAN/wireless network
Infrastructure mode
In order to configure the network between the wireless host device and the printer, set the
printer to Soft AP Mode.
Soft AP mode
* Soft AP mode is only supported on IFJ-WD.
A P