KT-230-1
6
Equipment versions A and B
These equipment versions are provided, in addition to
the standard state of delivery, with further components
which are completely mounted and electrically connec-
ted. In the table, these functions are marked with "A" or
"B".
Extensions
The components which can be retrofitted are marked in
the table as "options". They are delivered as accessor-
ies kit and must be mounted, wired and activated via
the BEST Software.
4VES-6Y .. 4N
ES-20(Y)
4JE-13Y .. 4FE
-35(Y)
6JE-22Y .. 6FE
-50(Y)
8GE-50(Y) .. 8
FE-70(Y)
Motor temperature monitoring (R1 .. R6)
Standard
Standard
Standard
Standard
Discharge gas temperature sensor (R7)
Standard
Standard
Standard
Standard
Oil monitoring (F4)
Standard:
OLC-D1: opto-
electronic oil
level monitor-
ing
Standard:
DP-1: differen-
tial oil pressure
monitoring
Standard:
DP-1: differen-
tial oil pressure
monitoring
Standard:
DP-1: differen-
tial oil pressure
monitoring
2 capacity regulators (Y3-1 and Y3-2)
A: CRII-1 and
CRII-2
A: CRII-1 and
CRII-2
A: CRII-1 and
CRII-2
A: CRII-1 and
CRII-2
Start unloading (Y1)
B: SU
B: SU
B: SU
Capacity regulator (Y3-2)
B: CRII-2
B: CRII-2
B: CRII-2
3rd capacity regulator (Y3-3)
Option: CRII-3
Monitoring of application limits: High pres-
sure transmitter (B6) and low pressure
transmitter (B7)
Option
Option
Option
Option
Additional fan (M2)
Option
Option
Option
CIC additional cooling (Y5)
Option
Option
Option
Optional temperature sensor (R11)
Option
Option
Option
Option
Tab. 1: CM-RC-01: pre-assembled variants and possible extensions
Information
Upon market launch, not all components are
available for each connection voltage. This is
also valid for the CIC system and the equipment
version B. The CM-RC-01, however, is able to
control the start unloading. Information regard-
ing retrofitting available upon request.
3.2
Dimensional drawings
These dimensional drawings show the equipment ver-
sions "A" and "B". The pre-assembled options and pos-
sible extensions differ depending on the compressor
series, see chapter Equipment versions, page 5.
CM-RC-01 in 4VES-6Y .. 4NES-20(Y)
430
63
382
63
716
162
187
A
B
C
D
CRII-2
1
2
CRII-1/SU
Option
Option
3
OLC-D1
4
Fig. 1: 4VES-6Y .. 4NES-20(Y) with CM-RC-01
Connection positions
1
Discharge gas temperature sensor
2
Connection position for high pressure
switch
3
Cable holder
4
Oil heater
A
Cover for terminal box
B
Module housing (grey)
